Re: Bulkhead #1 on wr 18

Posted by mike noeske on Mar 10, 2005

Here a link to a photo of what I did to the #1 and #4 bulkheads in my WR18.

Originally sanded the point of the bottom of the bulkhead so that any water would run thru. Planned to remove alot of the rest leaving about 3/4 inch at the hull and maybe 1 inch at the deck. Thought it just "looked" kinda weird after cutting it away. Ended up removing most of it, so that it is more of a rib, tahn a bulkhead.

Mike

In Response to: Bulkhead #1 on wr 18 by Patrick Forrester on Mar 9, 2005

Replies: