Builders' Forum Archives
Re: Bulkhead #1 on wr 18
Posted by CLC on Mar 9, 2005
We've gotten 'round to this one on the Forum a few times before.
I concur with all of the above responses. The #1 bulkhead is there to influence the overall hull shape, but once the hull is "tabbed" and the outside 'glassed, the #1 bulkhead can be taken out without any harm to strength or shape. Lee's suggestion of hotglue works great.
If you don't think you need loads and loads and loads of storage, go ahead and leave #1 in place as directed.
In Response to: Bulkhead #1 on wr 18 by Patrick Forrester on Mar 9, 2005
- archives aren't available by LeeG on Mar 10, 2005