Builders' Forum Archives
Posted by Howard on Feb 10, 2005
unless you are overly aggressive on epoxy fill coats, my experience is that over the course of your first season, if you get a lot of heat and sun exposure...you are going to get print through.
i usually end up refinishing boats after their 2nd or 3rd season and i find my refinished ones are smoother than ones that are halfway through their first season.
so i would not worry about this. you can't see the print through unless you are very close up...and just think...your boat will get more beautiful with age as the epoxy becomes fully "seasoned".
In Response to: Re: Imprinting by Steve Miller on Feb 9, 2005
- Re: Imprinting by terry on Feb 14, 2005