Builders' Forum Archives |
Re: 1st f glass experienc
Posted by Lloyd on Dec 3, 2004
My wife's, which was number three in our production, is much better.
I'm know saying she owes me a chance at another.
I believe that the fiber glass should be stopped short of the shear clamp so that it lays flat against the shear panel.
I believe your idea of cutting slits is good, but I think that I'll put the fiberglass in with three pieces with a slight over lap at the chine.
Perhaps I should do that and not put fiber glass tape on that fillet?
I had sharp edges at the shear clamp that I sanded off (but not before a cut).
In Response to: Re: 1st f glass experienc by jahrome on Dec 3, 2004
Replies:
No Replies.