Builders' Forum Archives
Wood/ End Pour
Posted by Lloyd on Dec 2, 2004
We maybe have been evolving to that. In the first of this thread "End Game (Pour) not the picture in the lower left.
This picture,taken from the stern, shows a piece of wood inserted between the end of the shear clamps and extending to the end of the boat.
This piece is about 1.5 inches deep.
We did this so that we would have something to hold the deck down to, which we thought the end pour made with a dam offered.
We also realized that it was lighter (and cheaper) than epoxy.
In Response to: Re: Ugly by Laszlo on Dec 2, 2004