Builders' Forum Archives
Re: Epoxy hardener pump
Posted by Cliff Herring on Nov 21, 2004
I second the comment about not trusting the pumps. I always pump into two separate plastic scoops that I have marked for the right ratio. For very small amounts, I use two small syringes that let me measure resin/hardener exactly.
You could take the pump apart and soak/clean it in vinegar to bring it back to life, but still verify amts every time you mix.
In Response to: Re: Epoxy hardener pump by Mac on Nov 21, 2004
- Re: Epoxy hardener pump by Terry Mcadams on Nov 22, 2004