Builders' Forum Archives
Re: Building Help- Califo
Posted by Russell on Oct 31, 2004
If the deck is installed most of the heavy labor has been done.
You do not need a rudder first off. Put that on next years to do list.
The coaming is just a lot of clamps, do not attempt without around 16 on hand (YMMV).
Varnish is a lot of sanding but does not require specal skill.
Deck rigging is no big worry.
Hmmmmmmmmm what about the hatches?
In Response to: Building Help- California by Lisa Lambiase on Oct 31, 2004