Builders' Forum Archives |
Re: "Mac" re: cabinet scr
Posted by Bill Cooke on Aug 25, 2004
Peter
My experience is only with the standard cabinet scraper - I used it after the fill coat and after the third coat before final sanding for warnish - probably should remvoe high spots early on - they just continue to "grow" with the additional coat of epoxy!
Bill
In Response to: Re: "Mac" re: cabinet scr by Mark Camp on Aug 25, 2004
Replies:
- Re: "Mac" re: cabinet scr by C. fronzek on Aug 25, 2004