Builders' Forum Archives |
Re: No fill wire holes?
Posted by Joe Lombardo on Jul 28, 2004
I trusted that the fiberglass and fill coats would seal the holes and can recommend that approach with one caveat. After fiberglassing and filling, I sanded down some rough spots on the bow and stern... all the way to the wood. I then gave those spots two more coats of epoxy and put the boat in the water.
Two coats without glass was not enough to seal the holes.
- Joe
In Response to: Re: No fill wire holes? by Doug Judd on Jul 28, 2004
Replies:
No Replies.