Builders' Forum Archives
I won't worry
Posted by Lloyd on Jul 26, 2004
We didn't have an excuse for the twist at the end except that we didn't look under the boat after going through the winding process (The boat required very little adjustment).
We did see that the keel and shear panels needed some lining up at the stern and applied clamps.
The last 6" out of line wasn't apparent until we turned it over after the filleting had dried.
I don't expect now that I'll do anything except maybe a little build up with epoxy before I fiberglass this weekend.
In Response to: Re: Last 6" to one side by Tony Calvert on Jul 26, 2004