Builders' Forum Archives |
look into a conversion
Posted by Charlie Jones on Jul 12, 2004
gun. It uses a standard compressor and converts to HVLP. Not quite the same but works well.
The only problem I ever found with a turbine HVLP was that the air got really hot and the material had a tendency to dry before it got to the surface. This was with Lacquer though.
In Response to: Re: Varnish/Paint w/ HVLP by Joe Aubin on Jul 12, 2004
Replies:
- Re: look into a conversio by Joe Aubin on Jul 13, 2004
- Re: look into a conversio by Mike M. on Jul 13, 2004