Builders' Forum Archives
Re: Paint now or sand mor
Posted by Steve Miller on Jun 10, 2004
I think in your place I would do the epoxy in two steps. First add another coat to just the areas you described as "down to the top of the S-glass". Use a squeegee or bondo spreader so you fill in the texture. Work neatly. When that sets (like overnight) then coat the whole thing including the areas just coated. Now you just have your prep sanding to do.
It will not be like starting over. Since you are smooth now you will just have to lightly prep sand it with 220 or 320 to paint. 120 is too coarse to paint over. The paint will still show the sanding marks.
In Response to: Paint now or sand more? by Aaron J. on Jun 10, 2004