Builders' Forum Archives |
Re: Rudder lines - thru d
Posted by M Davis on May 19, 2004
One way to run the lines thru the bulkhead and deck is to epoxy a piece of tubing into the holes so it extends from the cockpit, thru the aft compartment, and thru the deck.
Semi-rigid air tubing works very well. Just be sure to scuff the tubing where the expoy will be so there is a mechanical grip.
Happy paddling.
In Response to: Rudder lines - thru deck? by Baldwon on May 19, 2004
Replies:
- Possible solution by Baldwon on May 19, 2004
- Re: Possible solution by M Davis on May 19, 2004